Factory Supply Mineral Slate Torched Applied Coated Sbs Modified Bituminous Waterproof Membranes

• Customization: Available
• Product Name: Sbs Modified Bituminous Waterproof Membrane
• Type: Waterproof Membrane
• Model NO.: SBS PY I
• Raw Material: Modified Bitumen
• Reinforcement: Polyester
• Low Temperature Flexibility: -15degree
• Width: 1m
• Length: 10m
• Thickness: 4mm
• Roll Weight: 55kg
• Heat Resistance: 90degree
• Tensile Strength: 500n/50mm
• Usage: Waterproof Project
• Where to Use: Roof, Subway, Tennel, Bridge
• Bottom Surface: PE Film
• Upper Surface: PE Filmn, Aluminum Foil, Mineral Granule
• Transport Package: Packed in Rolls with Pallet
• Specification: 1m*10m or customzied
• Trademark: Jianda
• Origin: Cangzhou, China
• HS Code: 6807100000
• Production Capacity: 50000m2/Month
• Package Size: 20.00cm * 20.00cm * 100.00cm
• Package Gross Weight: 42.000kg

Product Description

Product Description

SBS modified bituminous waterproof membrane can be widely used for 

building surface and basement waterproof in industrial and civil

construction engineering, as well as waterproof for subway, cold storage,

airport runway and viaduct. While polyester felt is especially suitable for

waterproof of unstable structure engineering. The surface can be PE film,

aluminum foil, mineral granule and sand. The main purpose of the surface

is anti-aging

 

 

 

 

 

Detailed Photos

 

Features and benefits:

Anti-aging, anti-acid, and anti-alkali,

Long service life

High tensile strength and elongation

Good perdurable capacity to climate Applied by torch.

Product Parameters

soluble content/(g/m2)	2100g/m2
thickness	3mm
heat resistance	90degree
low temperature flexibility	-20degree
not permeable 30min	0.3mpa
tensile strength	500N/50mm
elongation	30%
size change rate	0.7%
seam peel strength (N/mm)	1.5
thickness	2mm,3mm,4mm,5mm
reinforcement	polyester, fiberglass
roll size	1m*10m, 1m*8m or customzied
package	can be customized

 

Packaging & Shipping

Package transportation and storage

The product is packed by plastic bag or adhesive tape.

Thickness:2-4mm width:1.0m length:7.5mm 10mm

During storage and transportation, keep the package well, put them in a dry , airy place, keep away from

direct sunlight, acids, alkalis, oil and organic solvents.

Installation Instructions

The waterproofing base should be strong smooth, and clean without particles on the surface. No peeling

or cracking shall exist on the surface. The corners of the base shall be made into arcs with a radius of

no less than 20mm or triangular. The drain slope, division seam, and air vent shall be carried out and

treated according to design requirements. Then brush primer on the foundation until it is dry

 

Company Profile

Cangzhou Jiansheng Building Waterproof Materials Co., Ltd. is a professional enterprise integrating the production and sale of building waterproof materials. Our company covers an area of 10, 000 square meters. There are 60 people in our company, including 5 professional senior engineers and 24 technicians. Our company is to set up a technological research team which consists of professionals, scholars and experts. Our company is specialized in the production and operation of various types of high and mid-grade new building waterproof materials, including SBS, APP modified bitumen membrane, polypropylene, and PE polyester. We have domestically advanced production lines with annual production capacity of 8 million square meters, advanced equipment, and strict scientific quality control system according to standards. At the same time, we produce SBS polymer waterproof coating, Chloroprene latex, asphalt and other series of waterproof paint. Our company is also equipped with first-class raw materials testing equipment as well as process control and finished product quality testing center. Our company is willing to cooperate with friends sincerely to advance hand in hand and create a better future.

 

 

FAQ